No Reserve! Absolute Auction Sale!

No Financing? Make arrangementwith us for up to 12 months topay with indoor storage until paid in full!

1969 Firebird 400 ConvertiblePro Touring Build Up

1969Trans-Am / 1970 GTO Tribute w all USA parts when available

HO 7.7L 467 Full Roller, troker total drive line package!

DYNO SHEET INCLUDED 500HP 580Ft Lb.

ORIGINAL BUILD SHEET, 969 DEALER PHOTO& PHS DOCUMENTS INCLUDED!

100 Miles on mechanical build. None on final finish!

TERMS: $500 deposit within 48 hours,balance due within 30 days unless pre-bid payment arrangements are made. If you are not allowed to bid due to our blocking of potential non-paying bidders or suspected ID or policy manipulations contact us to gain access to the bidding with simple verification through ebay communications. It is our goal to run a real NO RESERVE, BSOLUTE AUCTION and we have certain bidder requirements in place to MAKE our GOAL a reality so the HIGH BIDDER WINS with no bid manipulation nor interference.

CONSIDERATION FOR BID: THE COMPLETED CAR with clean title and ALL PARTS required to drive it away and enjoy it! All parts are on hand and the 2nd disassembly was to do quality metal and paint work.Car will be ready for delivery and completelyfinished within7 days ofnotice of pick up, here yourfinal payment will be made at time ofpick upin secured funds or payment can be prepaid and thereby cleared before any shipping services. We have access for any shipping company to load and transition vehicles as requiredfor shippershandling multiple unit. You can made requests concerning the final assembly but simple reassembly only is performed for you atno additional charge. Want more personalized work. NO PROBLEM butthat is not free and Labor is $40 per hour based on standard times for work. The INTERIOR needs some describing because it is not installed now so,ITIS MOSTLY ALL NEW or NICE ORIGINAL and is COMPLETEfor a BETTER DRIVER CAR as intended for my personal use!A MORE COMPLETE DESCRIPTION OF WHAT PARTSARE INCLUDED IS PROVIDED BELOW USING ACTUAL PHOTOS orSTOCK andactual Photosofthe NEWPARTS INTASTALLED, ESTED AND OR DYNO PROVEN. Interior, rilles, ront Bumper and Headlight Bezels are the only parts not installed and this car RUNS LIKE A BAT OUT OF HELL!

7.7L 467 CID 500HP CUSTOM STROKER ENGINE (100 miles) $12,795.00

Performance prepped 400 block -Bead Blasted and Magnafluxed, onic Tested, ompletely Deburred, ored and Honed with Torque Plate - Line Honed with ARP Main Studs, eck Squared, ainted, am Bearings, nd Brass Freeze Plugs Installed.

Crank 4.250 Stroke - Cast or Forged

Eagle 6.800" Rods w/ ARP Bolts 8740

Kieth BlackPistons

Pins .990 x 2.500"

Total Seal Classic Race Rings

Main & Rod Race Bearing- Federal Mogul or Clevite

Complete Gasket Set w/ Rear Main Seal

JPP Billet Gear Timing Chain

Comp Cams Hydraulic Cam & Lifters

Roller Tip Rockers

Canton Oil Pan

Melling Oil Pump w/ Pickup

HD Oil Pump Drive Shaft

Powerbond Balancer

Timing Cover, ater Pump, late & Sleeves

Ported Cast Iron Heads w/Oversized Long Valves, ronze Guides, alve Job, prings, ocks, etainers & 7/16 BBC Studs

ARP Head Bolts

Performer RPMIntake

Stainless Steel Bolt Kit

Chromemoly Push Rods

Aluminum Valley Pan

Chrome Valve Covers

REMOTE Oil Filter Housing

Dipstick & Tubes

Cam/Crank Bolts/Washer / Thrust Plate & Ecc

Oil, ilter & Spark Plugs

Internally Balanced

Assembled With Blueprint Sheet

BRAND X Cookie Cutter Crate Engine w/ Cast Crank (Long Block)$9,495.00 WITH UPGRADES AS OFFERED IN THIS AUCTION $12,795.00The above engine can be upgraded with the parts listed below:

Crate Engine Upgrade

Carb –Edelbrock 750 w custom tune

$500.00

Crate Engine Upgrade

Billet HEi Distributor and Wires

$389.95

Crate Engine Upgrade

Crate Engine Upgrade

Run and Break-in on Test Stand

$295.00

Crate Engine Upgrade

Dyno and Tune

$650.00

Crate Engine Upgrade

Billet Pulleys& ChromeAccessories

$600

Crate Engine Upgrade

Modified #670 Ported Heads w oversized valves

Starting @ $750.00

Crate Engine Upgrade

Crate Engine Upgrade

Edelbrock Endurashine RPM PerformerIntake

$365.00

Crate Engine Upgrade

1.7 Full Roller Rockers

$130.00

Crate Engine Upgrade

Crate Engine Upgrade

Hyd. Roller Upgrade

$699.00

Crate Engine Upgrade

CustumAluminum Valve Covers

$260.00

Super StreetFighting TH350 Transmission '69-'79 $1495

TheSuper StreetFighting Transmission bridges the gap between the street and full competition transmissions. This versionis intended for normally aspirated vehicles powered by engines producing up to 775 horsepower. Featuringbenefits asTrango Stage 2 Shift Kitwith both manual and automatic shift options to give you the power and shifts you want for the strip or easy driving for the street.
Features & Benefits:

• HP OVERSIZED clutches and nitrided steel plates for enhanced performance
• Extra-wide powerbands, here available, rovide greater torque capacity, nd more positive shifts & band apply
• Larger diameter servos increase band pressure which means more force on flex bands
• New sprags/roller clutches, nhanced hard parts and improved lubrication system
• Increased thrust capacity and higher line pressure for extra firm shifts & greater torque capacity with less slippage

TCI Breakaway Converter $395

The first step into serious high performance, he Breakaway® is a great torque converter for moderately modified street machines and weekend racers also used as daily drivers. It provides approximately 2400 to 2600 RPM flash stall without negatively affecting part throttle driving. Designed for efficiency at highway cruising speeds and to launch hard at wide open throttle, he Breakaway® is a fantastic all-around torque converter. Delivers 1900-2200 functional stall

Eaton PosiLimited Slip Differential $716

19603-010 Eaton Posi GM Chevy 8.2" Limited Slip Differential '64-'72 3.08 & UpPackage deals available featuring OE gear sets from AAM American Axle and Dana Spicer as well as aftermarket sets from Motive Gear and Yukon brand ring and pinion gear sets. Timken master bearing installation kits available also. Give us a call or email us for a package for your application.
APPLICATION: FITS 1964-72 GM 8.2 10 BOLT
AXLE PLACEMENT: REAR
AXLE SPLINE COUNT:28
SPLINE DIAMETER:
COVER: 10 BOLT
GEAR RATIO: 3.08 AND UP
MODEL:GM 8.2"
RING GEAR DIAMETER:8.2"
NOTES: GM 8.2" 10 BOLT 1964-1972' 28 SPLINE REAR DIFFERENTIALS Bel Air: 1964 - 1972 (Rear) Biscayne: 1964 - 1972 (Rear) Camaro: 1967 - 1972 (Rear) Caprice: 1965 - 1971 (Rear) Chevelle / Malibu: 1964 - 1972 (Rear) Chevy II: 1964 - 1972 (Rear) El Camino: 1964 - 1972 (Rear) Impala: 1964 - 1972 (Rear) Malibu: 1964 - 1972 (Rear) Monte Carlo: 1970 - 1972 (Rear) Nomad: 1964 - 1972 (Rear) Nova: 1964 - 1972 (Rear) Tempest: 1964 - 1970 (Rear) Trans Am: 1969 - 1972 (Rear)

Richmond Gear 3.55:1 lightenedRing & Pinion Gear Set $354.44

The superior quality of Richmond Performance Products is a result of continual research and development, utstanding design and state-of-the-art manufacturing. Extensive testing is performed on all Richmond products. Engineered to perform faster and more reliable, ur products are winners both at the Daytona 500 and U.S. Nationals for decades! RICHMOND Lightened Gears offers you up to a six pound reduction in rotating weight, inion threads are ground to gage quality to insure trouble free installation.

Ram Air Restoration Ent. Exhaust and Engine Accessories

Ceramic coated silver LB-1 Long Branch D-Port Factory Headers...67-69 Firebird $638

Get tube header performance gains without the tube header hassles, oise and ground clearance problems in Pontiacs.
Fits 67-69 GM F-body Firebird, 1-77 X-body Ventura, 0-70 B-body Cat Bonne, 9-72 GP. Castings from our competition aren't even close to the LB-1 quality and flow and our original detail. Compare castings that Ames Perf and Perfromance years sell to ours in photos above. Our warranty says exactly what our product quality is...Lifetime Guarantee, eriod.CORRECT PN VERSION 1968-69 - LH 9779495, H 9791607
Each requires 2-bolt flange (FL-3 sold & purchased separately); also requires oil filter adapter OF-1 (big car) or OF-2(Firebird, P and Ventura). Other recommended items H-5 bolt kit and G1-P gasket set.ALL REQUIRED PARTS PURCHASED INCLUDING REMOTE OIL FILTER.
INCLUDED CERAMIC COATING: Both castings are port-matched to Pontiac blueprint then thermal barrier ceramic coating is applied and cured on interior and exterior. Choice of Silver or Gray. 3-year Finish Guarantee. Will not burn off, ade or peel. Reduces header temperature 30%! Silver is chrome-like.

UESYS-2 Ultimate Exhaust System - 2.5" with X-over - Long Branch $649 + $100 required xtras

All complete systems include LB flanges, anger, SpinTech full weld mufflers, clamps and install instructions. (SYSTEM IS WELDED)FB use short case mufflers only. Systems with x-over include ball & cone connectors (a needed item for x-systems...position ahead of mufflers).Only superior RARE x-over components are used in our systems! Tailpipes are thick-wall 14 ga. aluminized steel or mandrel bent 16ga.All components are made in the USA.

PSPS-69E-B, SPS-69E-C Billet Pulley Set - Early '69 with 4" Pump, /S & no A/C $334Billet Pulley Set includes 2 gr. crank, ater pump, ower steering pump, nd alternator pulleys and alt.nut/washer. This set for a 69 with 4" 11 bolt water pump (4" measured from pump flange-face to the gasket surface of pump housing).Much stronger & "true-er" than stamped steel pulleys.

AWP-1P High Flow Aluminum Water Pump 69-81 PONTIAC $189 POLISHED TO BRIGHT REFLECTIVE FINISH WITH CLEAR-CERAMIC COATING...Aluminum Flowkooler water pump fits all engines with 69 or later timing cover. 11-bolt type stock offset on pump flange for correct pulley alignment. Hi flow impeller makes this pump the most efficient available!

TC-11 Stock timing cover for 69-81 $179 Our reproduction 11 bolt timing cover is fully machined and has exact original configuration. Addtionally, t has large timing scale...12 degrees BTDC to 4 degrees ATDC. Excellent finish.
Uses hardware kit TI-2 with correct length bolts and studs for original appearance.
FinishPowdercoated inMetallic Silver Blue ('66-'70 engine color)Powder coating or ceramic is applied internally to provide protection against metal degrade over extended time.

Trans-Dapt Performance Products 1120 -Remote Oil Filter Relocation Kit $65 Kit makes oil changes a snap when re-clocking is required for use ofLONG BRANCH FACTORY HEADERS as found stock on Factory RAM-AIR CAR applications.

Summit Racing Street & Strip® Ready-to-Run Billet Distributors SUM-850400-1 $239 Our Summit Racing Street & Strip® ready-to-run billet distributors provide reliable spark throughout the rpm range, o they'll deliver the performance you need, o matter what you drive--race car, treet machine, r hauler. The affordable distributors have high-dollar features that outperform the competition, ike a lightweight aluminum housing that's precision CNC-machined for strength and stability, olished steel shafts with sealed ball bearings for stable operation through 10,000 rpm, nd a maintenance-free, igh-output magnetic trigger for accurate and reliable performance. The distributors have a black alkyd cap and some models also feature vacuum advance. An ignition box is not required for use with Summit Street & Strip® ready-to-run billet distributors.

OTHER NOTE WORTHY POINTS:

EDELBROCK ENDURASHINE RPM PERFORMER INTAKE

EDELBROCK CUSTOM TUNED RECONFIGURED 750cfm ELECTRIC CHOKE CARB

EDELBROCK RPM PERFORMER FUEL PUMP POLISHED

HOTCHKIS CHASSIS BRACES & SWAY BAR KIT

HOTCHKIS CHASIS MAX FRAME TIES AND X BRACE

STAINLESS TANK AND FUEL LINE KIT

CHROME POWER COAT DISC DRUM BRAKE CONVERSION KIT W LINES AND BRAIDES HOSES

AMAERICAN RACING RIMS

BF GOODRICH TIRES

NEW CONVERTIBLE TOP, ADS & WIRES

NEW DOOR PANELS FRONT AND REAR

NEW CARPET

NEW UPHOLSTERY FRONT AND REAR SEATS

DASH PAD RECONSITIONED

INSTUMENT BEZEL RECONDITIONED for Dakota Digital

ALL CHOME AND TRIM NEW OR BETTER DRIVER QUALILTY

NEW CONVERTIBLE FULL WEATHERSTRIP KIT

NEW ROCKER AND WHEEL MOULDINGS, ILL PLATES, EDDLE RUBBER AND STAINLESS TRIM

NEW RADIATOR, HERMOSTAT, LL HOSES AND BELTS

NEW POWER STEERING PUMP AND STEERING GEARBOX

ALPINE STEREO (need speekers)

ALL BODY PARTS, ETAL, RIM AND GLASS WAS REMOVED TO ADDRESS ALL POSSIBILITIES OF HIDDEN RUST AND TO DO GOOD PAINT WORK.ROCKERS, UARTERS, LOOR PANS, ND FENDERS REPLACED OR REPAIRED AS REQUIRED. FRAME RAILS WERE AMAZINGLY GOOD AND TRUNK PAN HAD JUST A FEW PINHOLES AND WAS STRONG WITH NO SIGNIFICANT LOSS OF INTEGRITY WHATSOVER SO IT WASREPAIREDAND RETAINED.

SEND ME YOUR EMAIL ADDRESSfor a link to a lot more pictures since 24 pictures of a part of a classic car is a silly limitation.

On Aug-20-15 at 20:50:08 PDT, eller added the following information:

CLARIFICATION FOR ANYONE CONFUSED: I WANTED TO SAVE YOU THE DRAMA OF MY PERSONAL INJURIES CAUSING THIS SALE BUT SOME PEOPLE WANT A STORY SO HERE IS THE SIMPLE VERSION!

For sale is this 1969 Firebird Convertible with all ofthe goodies mentioned and more! This car was professionally rebuilt from the ground up mechanically without consideration of cost to achieve my final goals. The Machine shop is owned by a former Pontiac Machinist of this era. He did a fine job bringing the old and new together and planning the total build up with me,

My goals were, ar must outrun all current American Made Sports Cars, e reliable for daily driving, e ready to drive 5000 miles in an instant without any major concerns, e capable of achieving 17-18MPG on highway, nd regardless of how I drive on the street, ast at least 100,000 miles with improved handling and no concerns about twisting the car in two!

This was asking a lot, ut it was done, nd proven at least in part. I DROVE IT almost 100 miles after mechanicals before body work and did a total tear down to get all the hidden issues too!

Oh, almost forgot that I color matched the bumpers and integrated the rear bumper to keep those mistaking the car for a 1970 GTO confused! The one thing I didn't want was just another WEAK POWERED replica of a MEAN MUSCLE MACHINE. This car is not a TRAILER QUEEN nor a show only stalling when driven, useum piece. It turns lots of heads and will open wide the eyes of the NEXT CROTCH ROCKET that tries to pass you and fogets to look before he comes over!

Included in your bidding is the final assembly that I have not done only because due to spinal cord and brain stem trauma I should not drive anymore. I can but there are risk to others if I do it so just like drinking and driving I don't do it!

On Aug-21-15 at 19:41:02 PDT, eller added the following information:

I got some help this weekend to get this car together and move everything around to get it our of the shop before auction end soI will have better pictures of the car,completed or very close! I am not sure if I can add them to ebay with 24 photos up and bids but I will try. I will reply to requests for more pics when I am happy with work and take them so be patient they will come with plenty of time before auction end!