DRIVE TRAIN
3.5 liter twin plug engine with approximately 5000 miles. This motor was built on brand new factory case (Part number only. The serial number is not stamped on this case) with new Mahle pistons and cylinders, new 964 cams, port and polished heads with new guides, new valve seats new valves and new Andial Springs, Andial Steel Head gaskets, new Carillo Connecting Rods, Extrude Honed 3.2 Carrera intake manifold with 52 lb matched injectors. Motor is completely balanced.
KKK turbo
B&B Large Intercooler
B&B Muffler with Dual 4.5" Tips
B&B Headers with Heat Exchangers.
RUF factory front oil cooler
New Bosch Platinum Plugs
ENGINE MANAGEMENT
Motec M800 ECU with an ignition expander driving 12 near plug ignition coils. Motec modified Porsche REF SYNC distributor.
Motec options turned on are Dual Lambda option. All harnesses are professionally done Mill Spec and Deutsch connectors, Tefzel wire, with Raycem heat shrink and boots. All sensor and ignition components are Motec.
Included Motec sensors are 2 lambda right & left bank, 2 EGT right & left bank, 2 wheel speed, 3 axis G force, oil temp, eng temp, before and after intercooler temps, Boost and fuel trim 9 position switches, Oil pressure, fuel pressure, brake sensor, TPS sensor, manifold pressure, intake air temp.
GEARBOX
5 speed, G50/50 from a 1989 930
New Heavy Duty Sachs Clutch Kit
EXTERIOR
RUF Factory Front Valance
RUF Factory Rear Bumper
RUF 9" & 10" Rims
RSR 3.8 Rear Deck
993 Manual MirrorsPorsche Factory Steel Boxed Rockers
INTERIORRUF Boost Gauge in place of clock
Factory Sport Seats (Beautiful condition with no damage or bolster wear)
Turbo S Steering Wheel
Blaupunkt AM/FM Cassette
Rear roll cage installed. Front half of roll cage included or I can have the rear half removed in lieu of including the cage.
BRAKES
993 Turbo Calipers with near new 13' Front Rotors
928 S4 front Calipers in the rear
In cabin brake bias adjuster
Stainless steel brake lines
SUSPENSION
Bilstein RSR adjustable front and rear coil over suspension
ERP Bump steer kit
Rack Spacers
Weltmeister front and rear sway bars
The Fine Print
This cars paint and body is in beautiful condition. The passenger side door has a small door ding which a paint-less dent removal person should find easy to remove. The rear inner side panels were removed when cage was installed. I have a pair that I planned to fit around the cage but I never got to this. I will include these panels with the car. The black on the lower front valence has chips in the paint and should be touched up. The RUF wheel lips do not have rash but do have some nicks and imperfections. I attempted to redo the clear coat on one but it didn't come out well so i didn't continue.
I will gladly show this car but please no tire kickers.
This is simply a fantastic one of a kind 930. The new owner will never regret this purchase.
Thanks for looking.